About us
CHEMIACOM LTD gained a vast experience during the last ten years of activity, mostly in selling petroleum and petrochemical derivatives, top quality products, for instance PARAFFIN WAX, MINERAL OILS, BITUMEN, NATURAL ASPHALT, POLIETYLENE, POLIPROPYLENE, SYNTHETIC RUBBER.
The large area of the warehouse made possible for us the no1 dealer position.
Our policy means satisfying our clients in the most demanding requirements. CHEMIACOM LTD, an advantageous partner for the development of your company.
Products
PARAFFIN WAX |
RUBBER PROCESS OIL ( RPO ) |
NATURAL ASPHALT ( GILSONITE ) |
BITUMEN |
PBR |
STYRENE BUTADIENE RUBBER (SBR) |
ABS |
OIL |
POLYMERS |
SYNTHETIC RUBBER |
CARBON BLACK |
Order
Contact
ADDRESS: 8 Radu Beller St.,Bl.22, Sc.A, Ap.13, 1st district, BucharestEMAIL: info@chemiacom.ro
PHONE/FAX: (+40) 21 231 42 64 , (+40) 720 029 029
PARAFFIN WAX
Paraffin Wax Type A, Paraffin Wax Type B
| GRADE | OILCONTENT Wt% | MELTING POINT DEG. C. | COLOR | AVAILABLE IN |
| PW.A PW.B |
2-3 3-4 |
62-64 58-60 |
< 1.0 < 1.0 |
CARTON CARTON |
- Dimensions of paraffin sheets (cm): 50 *30*4
- Dimensions of cartons/Boxes (cm): 51*31*21
- Gross weight of each carton (kg): 26 Kg +/- 2%
- Number of sheets in each carton: 5 sheet
- Sheets are supported in plastic (PE) cover.
- Cartons are support by two parallel bands.
- Production capacity (delivery tonnage): 10000 metric ton per year.
- If requested the production capacity may be increased up to 15000 metric tons per year.
**Application: Candling, Textile, Paper, Cable, Polish, Match, Wood
Paraffin Wax Type C
| SRL.NO. | GRADE | OIL CONTENT Wt% |
KINEMATIC VISCOSITY @100 |
FLASH POINT DEG. C. |
POUR POINT DEG C |
AVAILABLE IN |
||||
| S103 | RW | G | L | G | L | G | L | G | L | DRUM (Used or New) |
| Max 65 | Max 50 | 8.73 | 9.15 | 248 | 205 | +30 | +35 | |||
G: General
L: Laboratory
- 80 Drums /20 FCL
- 90 Drums Truck
- Net W. / Drum: 177Kg+/- 2%
- Gross W. / Drum: 195 +/- 2%
Order Back
RUBBER PROCESS OIL ( RPO )
| SRL.NO. | GRADE | FLASH POINT DEG. C. | DENSITY@15C | KIN.VIS@100C | AVAILABLE IN |
|||
| S104 | RPO | G | L | G | L | G | L | DRUM (Used or New) |
| 240 | 274 | 1.00 | 1.01 | 34 | 44.5 | |||
G: General
L: Laboratory
- 80 Drums /20 FCL
- 90 Drums / Truck
- Net W. / Drum: 207Kg+/- 2%
- Gross W. / Drum: 225Kg +/- 2%
- Container 1 Mt / PE 1060 kg +/-1%
**Application: Rubber process industry, Ink Production industry
Order Back
NATURAL ASPHALT ( GILSONITE )
| PROPERTY | VALUE |
| ASH CONTENT ( WT%) | 10±2 |
| MOISTURE CONTENT (WT %) | 0.5-1.5 |
| VOLATILE CONTENT ( WT%) | 60-65 |
| FIXED CONTENT | 25-35 |
| SOLUBILITY IN CS2 ( WT%) | 85-90 |
| SOLUBILITY IN TCE (WT%) | 60-70 |
| NORMAL HEPTAN INSOL (WT%0) | 60-70 |
| SPECIFIC GRAVITY@25 | 1.1-1.2 |
| COLOUR | BLACK |
| SOFTENING POINT C | 190-230 |
| PENETRATION @25C/0.1mm | 0-2 |
CHEMICAL PROPERTIES
| TEST RESULT (WT%) | |
| CARBON | 75-82 |
| HYDROGEN | 6-9 |
| NITROGEN | 0.8-9 |
| SULPHUR | 3-6 |
| OXYGEN | 1.5-2.5 |
Order Back
BITUMEN
Bitumen Grade 60-80
| Specification Test | Method A.S.T.M. | |
| Specific Gravity at 25/25 DEG C° | 1.01/1.06 | D.70 |
| Penetration AT 25 DEG C° | 60/70 | D.5 |
| Softening Point DEG C° | 49/56 | D.36 |
| Ductility at 25 DEG C° CMS | 100 MIN | D.113 |
| Loss on Heating PCT WT | 0.2 MAX | D.6 |
| Drop in Penetration after Heating PCT | 20 MAX | D.5 |
| Flash Point DEG C° | 250 MAX | D.92 |
| Solubility in CS2 PCT WT | 99.5 MIN | D.4 |
| Organic Matter Insoluble in CS2 PCT WT | 0.2 MAX | D.4 |
| Spot Test | Negative | *A.A.S.H.O T102-42 |
* American Association of State Highway Officials
Bitumen Grade 85-100
| Specification Test | Method A.S.T.M. | |
| Specific Gravity at 25/25 DEG C° | 1.01/1.05 | D.70 |
| Penetration AT 25 DEG C° | 85/100 | D.5 |
| Softening Point DEG C° | 45/52 | D.36 |
| Ductility at 25 DEG C° CMS | 100 MIN | D.113 |
| Loss on Heating PCT WT | 0.5 MAX | D.6 |
| Drop in Penetration after Heating PCT | 20 MAX | D.5 |
| Flash Point DEG C° | 225 MAX | D.92 |
| Solubility in CS2 PCT WT | 99.5 MIN | D.4 |
| Organic Matter Insoluble in CS2 PCT WT | 0.2 MAX | D.4 |
| Spot Test | Negative | *A.A.S.H.O T102-42 |
* American Association of State Highway Officials
Order Back
PBR
*Raw material
| Typical properties | Test method | UNIT | Value |
| Cis content Raw Mooney Viscosity Volatille Matter Ash Content |
ZEON R-130A ASTM D-1646 ASTM D-1416 ASTM D-1416% |
Wt ML-4 % Wt % Wt |
Min 97 41-49 Max 0.5 Max 0.3 |
** Compound
| Compound Mooney Viscosity Tensile (35 min) Elongation (35 min) |
ASTM D-1646 ASTM D-412 ASTM D-412 |
ML-4 Kgf/ cm2 % |
Max 77 Min 150 Min 440 |
| 300% Modulus at 145° C 25 Min. 35 Min. 50 Min |
ASTM D-412 | Kgf/ cm2 | 68 : 108 74 : 114 74 : 114 |
| Rheometer at 160° C MH ML TS-1 T50 T90 |
ASTM D-3189 | Ibf in Ibf in Min Min Min |
32.0 – 40.0 5.2 – 11.2 2.1 – 6.1 6.0 – 10.4 8.3 – 13.1 |
Compound Recipe
| Raw BR-1220 HAF Carbon (IRB No. 6) Zinc Oxide Stearic Acid Accelerator (TBBS) Sulfur Highly Aromatic Oil Vulcanization Temperature |
ASTM D-3189 | Part ... ... ... ... ... ... °C |
100 60 3 2 0.9 1.5 15 145 |
Other specifications
| Anti Oxidant Catalyst Type Packaging |
Non-staining – High quality Cobalt 35 Kg Bales, Wrapped in 50 Micron LDPE Film & each 30 bales are in a box pallet |
Applications:
It is used for the production of tire, footwear, belts, rubber hoses & other mechanical rubber products.
Order Back
STYRENE BUTADIENE RUBBER (SBR)
| Property | Unit | Value | Test Method |
| Volatile Matter | WT% | Max. 0.75 | D-1416 |
| Ash | WT% | Max. 1.50 | D-1416 |
| Organic Acid | WT% | Max. 4.75-7.00 | D-1416 |
| Bound Styrene | WT% | Max. 22.5-24.5 | D-1416 |
| Soap | WT% | --- | D-1416 |
| Raw Viscosity at 100 C | ML 1 +4 | 46.0-58.0 | D-1646 |
| Compound Viscosity at 100 C | ML 1 +4 | Max. 84 | D-1646 |
| Tensile Strength (35 min,145 C) | Kg / Cm2 | Min. 250 | D-412 |
| Elongation (35 min,145 C) | % | Min. 350 | D-412 |
| 300 % Modulus (35 min,145 C) | Kg / Cm2 | 167-207 | D-412 |
Applications : Rubber Parts, Vehicle Tires, Foot Wear,Adhesive
Order Back
ABS
| Property | Test Method | Test Condition | Unit | Typical Value |
| MFI | ASTM D 1238 | (200 oC/5kg) | Gr/10 min | 1.7 |
| Izod Impact Strength (notched) | ISO 180 | 1/8 inch | kj / m2 | 25 |
| Tensile Strength @ yield | ASTM D 638 | 5mm/min | Kgf /cm2 | 440 |
| Elongation @ Break | ASTM D 638 | 5mm/min | % | 40 |
| Flexural Strength @ Yield | ASTM D 790 | 2.8mm/min | Kgf /cm2 | 640 |
| Flexural Modulus | ASTM D 790 | 2.8mm/min | Kgf /cm2 | 20500 |
| Vicat Softening Temperature (unannealed) | ASTM D 1525 | 5 Kg | oC | 20500 |
| Rochwell Hardness | ASTM D 785 | -- | R-sCALE | 104 |
| Flammability | UL 94 | 1.5 mm Specimen | Recognized | HB |
Packaging
SD-0150 ABS is packed in 3 layer PE bags having a black anti-UV layer , 25 Kg each bag.
Order Back